A burst supply line, an overflowing tub, or a storm surge under the back door doesn't wait for business hours, and neither do we. We dispatch Mission units carrying industrial extraction pumps, air movers, and commercial dehumidifiers already loaded on the truck.
Too many Mission, TX families have called a big national number only to get bounced through hold music before a random subcontractor shows up hours later, so Hirex Water Damage built its Mission operation differently. Every technician on our Mission roster is a Hirex Water Damage employee, not a gig-app contractor pulled from a random directory.
Our senior technicians are IICRC-certified and have worked everything from a clean supply-line break to a full sewage backup, so Burst Pipe Cleanup in Mission isn't a side service we tacked on — it's the reason the company exists. Full liability coverage and Mission, TX licensing back every job we take, so you're protected from the moment our truck pulls into the driveway.
We keep a stocked warehouse inside Mission, TX so equipment never has to be trucked in from another region, which is the difference between a 45-minute arrival and a next-day one.
Ask any Mission property manager who has dealt with a burst supply line at 3am — the difference between a crew that shows up ready and one still loading a truck at the shop is measured in gallons of water soaking into your subfloor. That's the gap Hirex Water Damage was built to close, one Mission call at a time.
The most expensive Mission restoration jobs we run almost never started as a dramatic flood; they started as something small that got put off. Here's what tells us a property needs professional attention rather than a mop and a fan:
If any of that sounds familiar, don't wait for it to get worse — call our Mission line and we'll tell you honestly whether it's a same-day emergency or something we can schedule.
Whether it's one bedroom carpet or an entire flooded commercial floor, our Mission crews scale the response to match the loss — nothing gets a cookie-cutter response.
Truck-mounted extraction equipment on every Mission rig pulls high volumes of standing water fast, so drying starts the same day instead of the next. Every extraction job includes moisture mapping so we know exactly which materials are still holding water once the visible flooding is gone.
We place industrial dehumidifiers and air movers based on actual psychrometric calculations, not a standard equipment count per room, with daily drying logs so you can see the numbers improving, not just take our word for it.
For Mission homeowners, that means drywall removal at the flood cut line, subfloor assessment, and content pack-out for anything that can be saved, with clear photo documentation at every stage for your insurance claim.
For commercial Mission accounts, we assign a project lead, run crews after normal hours to reduce downtime, and bring equipment sized to the actual footprint — we know a flooded lobby or a leaking unit above tenants below has to move fast.
Category 3 blackwater calls for full PPE, antimicrobial treatment, and disposal of anything porous that touched the contamination — our Mission crews are trained for exactly that protocol.
We apply antimicrobial treatment during every Mission drying job specifically to head off mold before it starts, and we'll flag any area that needs deeper remediation.
We quote the job before equipment gets plugged in, so there's no surprise line item buried in the final invoice.
Our Mission, TX warehouse keeps drying equipment close, which typically puts a Mission tech at your door inside an hour.
We document everything with photos and moisture logs and work directly with your adjuster so you're not stuck translating restoration jargon.
We don't call a job finished until the moisture meter agrees, and if it doesn't, we return at no additional cost.
A short call with our Mission dispatcher tells us whether this is a one-room job or a multi-crew response before anyone drives out.
The closest available technician is routed to your Mission property with equipment staged and ready.
Extraction happens immediately, followed by a moisture survey that tells us precisely where the drying equipment needs to go.
Daily moisture checks continue until every affected material reads dry, and you get a complete report at the end.
We measure moisture with instruments, not guesswork, and we won't sign off on a Mission job until those readings match the dry standard for the materials involved. If a callback shows lingering moisture within 30 days of a completed job, we return and correct it at no additional charge.
We put that guarantee directly on the Mission work order, not just in an ad. We try to send the original technician back for any follow-up so you're not re-explaining the job to someone new.
"Our water heater let go at midnight and a Hirex Water Damage tech was pulling water out of the hallway by 1am. Fast doesn't begin to cover it." — Danielle R.
"They dealt with my insurance adjuster directly and I didn't have to translate a single restoration term myself." — Marcus T.
"Appreciated getting real numbers each day instead of someone just saying 'looks good' and packing up." — Priya S.
"They worked overnight so our restaurant wasn't closed longer than it had to be. That mattered a lot to us." — Aaron W.
"Nobody wants to call about a sewage backup, but they walked me through the containment and PPE process calmly." — Lena G.
"The quote matched the final invoice exactly. No surprise charges tacked on at the end." — Sam O.
Most Mission dispatches are on-site within 60-90 minutes since our crews and equipment are based in-state, not flown or trucked in from elsewhere.
We always quote first. You'll see a written estimate for the Mission job before any drying equipment starts running.
Emergency extraction, structural drying, and sewage/contaminated water cleanup are all available 24/7 for Mission properties.
We build our paperwork specifically to match what adjusters need and will speak with your insurer on your behalf.
We take moisture meter readings on affected materials and compare them against the dry standard for that material type — a visual check alone isn't enough.
Yes, our Mission crews are trained and equipped for Category 3 blackwater response, including PPE and antimicrobial treatment.
If it's safe, shut off the water source, move electronics and valuables away from the affected area, and avoid the space if standing water is near outlets.
Commercial response is a regular part of our Mission work — restaurants, offices, and multi-unit buildings included.
Typical drying time runs 3-5 days for a Mission home, though a job that sat unaddressed longer can take longer to fully dry.
Not if it's addressed quickly — mold generally needs 24-48 hours of sustained moisture, which is exactly why fast extraction matters.
Our Mission guarantee covers a 30-day callback window — if moisture shows up again from the same loss, we come back free of charge.
See the zip codes and nearby cities listed below — our Mission crews cover that full radius.
Mission is our home base, and our reach extends across Mission, TX through a network of staged equipment and on-call technicians. If your address falls inside or near Mission, a Hirex Water Damage crew can typically respond the same day.
— Embedded service-area map for Mission, Mission, TXOne call gets you a Mission-based team, not a routed national queue.
Call +1-844-234-5373